D J RECYCLING · WORTHING AND WEST SUSSEX
How to load a skip safely
Put heavy, flat items in first, break furniture down, fill the gaps with smaller waste and stop when it is level with the top. A well-loaded skip takes more waste and can be lifted safely.

The short answer
Load heavy and flat items first, then bulky items, then fill the gaps with smaller rubbish. Keep everything level with the top edge. Our drivers cannot lift a skip that is overfilled or too heavy, so loading it well saves you a second trip.
Start with the heavy, flat items
Lay doors, boards, slabs and broken-up worktops flat on the floor of the skip first. They make a solid base and spread the weight. Rubble and bricks also go in early, near the bottom, so they are not sitting on top of lighter waste.
Keep heavy waste to the smaller skips. Soil and rubble only go in our 2 and 4-yard skips, because a bigger skip full of them is too heavy to lift. See rubble and hardcore and soil in a skip for the limits.
Break things down before they go in
A wardrobe or sofa thrown in whole fills a skip with air. Take doors off units, unscrew table legs and flatten boxes. Cut long timber and garden branches into shorter lengths so they lie flat. A few minutes with a screwdriver frees up a lot of room.
Fill the gaps as you go
Once the bigger pieces are in, push bags, offcuts and smaller rubbish into the spaces between them. Work from one end of the skip to the other, so the load stays even and nothing slides when the lorry lifts it.
Stop at the top edge
Everything must sit level with the top of the skip, with nothing sticking out over the sides or the ends. Overfilled skips cannot be lifted or driven on the road safely, so we will ask for the extra to be taken out before we collect. If you run out of room, ask us for a swap or a second skip instead.
Not sure you have the right size? Our skip sizes guide shows roughly how many bin bags each one holds.
What to keep out of the skip
Asbestos, paint, chemicals, gas bottles, batteries and tyres cannot go in. Plasterboard has to be kept separate too. Mattresses go in free, and electrical items can go in if you tell us when you book. Check what can go in a skip before you start, and never light a fire in a skip or near it.
If the skip is on the road
A skip on the road or pavement needs a council licence, and it must stay in the space the licence covers. Do not move it or block drains and driveways. Our skip permit guide explains the West Sussex rules.
Common questions
How full can I fill a skip?
Level with the top edge of the skip and no higher. Nothing can stick out over the sides or ends, because an overfilled skip cannot be lifted or driven safely.
What should go in a skip first?
Heavy and flat items such as boards, doors, slabs and rubble go in first, laid flat on the bottom. Bulky items go next, and smaller rubbish fills the gaps last.
How do I fit more in a skip?
Break furniture down, flatten boxes, cut branches and timber into short lengths, and fill the gaps between bigger items as you go. Loading this way can fit far more than throwing things in whole.
What happens if my skip is too heavy?
A skip that is too heavy cannot be lifted safely, so some of the load will need to come out before collection. Keep soil and rubble to 2 and 4-yard skips to avoid this.
FREE QUOTE
Get a price in under a minute
Tell us what you need and your postcode. We reply with a clear price before you book, with no payment needed.
